Floor Epoxy
Our floor epoxies are tough and reliable two-component coatings designed to seal and protect concrete surfaces. Once cured, they deliver a smooth, high-gloss finish that resists stains, chemicals, and heavy wear. They are perfect choice for transforming garages, studios, or workspaces with long-lasting strength and style.
Product Features
-
Strong Adhesion: Bonds effectively to existing concrete and coated surfaces for a reliable finish.
-
Crystal Clear Finish: Dries to a smooth, transparent layer that enhances the look of your floor.
-
Durable Protection: Resistant to wear, stains, and chemicals—ideal for high-traffic areas.
-
Easy to Clean: Seamless surface makes cleaning and maintenance quick and effortless.
-
Simple Application: Designed for easy mixing and smooth application, whether DIY or professional.
-
Complete Kit: Supplied as a 3.5 L two-part system (Part A and Part B) for convenient use.
-
Efficient Coverage: Covers 6 to 8 m² per litre per coat, ensuring full and even coverage.
-
Recommended System: One colour coat (diluted 5% with water), followed by a second coat, decorative flakes, and a clear topcoat for a professional finish.
Our Range of Floor Epoxies
Flake Epoxy
Flake epoxy coating is a tough, decorative flooring system that combines a coloured epoxy basecoat with vinyl flakes and a clear topcoat. It creates a seamless, textured finish that’s resistant to wear, moisture, chemicals, and UV.
Popular in garages, workshops, and pool areas, it’s both stylish and highly durable, offering a low-maintenance, long-lasting surface that hides imperfections and improves grip.
Colours and Prices
Please note: Colour chart is a guideline of colours available. To see a dry sample of the actual colours available please visit one of our factories
BASE COLOUR
Grey
Grey
OPTIONAL FLAKES
Grey
Grey
FACTORY PRICES
incl. VAT
Prep Your Surface!
THE MOST IMPORTANT STEP
-
Remove oils, grease, and contaminants by scrubbing with a suitable degreaser and cleaner.
-
Rinse thoroughly with clean potable water until the surface is water break-free.
-
Allow surface to dry completely.
-
Abrade the surface to remove laitance and open all voids by one of the following:
-
Etching with Ramuc Clean & Prep solution.
-
Grinding or light vacuum blasting.
-
Ensure the surface texture is similar to 100-grit sandpaper.
-
Verify substrate has minimum tensile strength of 1.5 MPa and moisture content below 5%.
-
Patch all grind marks in the substrate before coating to achieve a smooth finish.
-
Protect the area from dust and isolate access to prevent contamination between layers.
Filling in Cracks
IF NEEDED
-
Fill cracks and holes with Dural 30/35NS Quickset Epoxy Paste.
-
For badly pitted surfaces, skim floor with a suitable screed using a trowel.
-
Allow patch or screed to cure fully.
-
Sand patched areas smooth before proceeding.
-
Apply one coat of FLAKE-IT Flooring basecoat, thinned with 5% water, at approximately 6-8 m²/litre using a roller to seal pores.
-
Allow basecoat to cure for 6 to 8 hours before overcoating.
