Pool Epoxy
Our Pool Epoxy Coating offers unmatched protection and style for your swimming pool. This premium epoxy creates a seamless, waterproof barrier that resists leaks, chemicals, UV rays, and temperature changes. Easy to apply on concrete, fibreglass, and coated surfaces, it delivers a polished, durable finish in three classic colours, keeping your pool beautiful and functional for years. Perfect for new pools or renovations, it’s the ultimate low-maintenance upgrade.
Product Features
-
Waterproof Protection: Creates a seamless, waterproof barrier to prevent leaks and protect your pool surface.
-
Chemical & UV Resistance: Designed to withstand the harsh effects of pool chemicals, UV exposure, and temperature changes.
-
Versatile Application: Suitable for concrete, fibreglass, and previously coated surfaces.
-
Durable Finish: Provides long-lasting protection and maintains its appearance over time.
-
Vibrant Colour Options: Available in various colours to suit your design preferences.
-
Easy Application: Designed for a smooth application process, making it ideal for DIY or professional use.
Our Range of Pool Epoxies
Colours For Pool Epoxy RNF Range
Please note: Colour chart is a guideline of colours available. To see a dry sample of the actual colours available please visit one of our factories
3 Day Manufactoring Time
7 Day Manufactoring Time
FACTORY PRICES
incl. VAT
Before purchasing, calculate your pool size sqm to ensure you purchase the correct amount of product.
Colours For Pool Epoxy CR Range
Please note: Colour chart is a guideline of colours available. To see a dry sample of the actual colours available please visit one of our factories
FACTORY PRICES
incl. VAT
Before purchasing, calculate your pool size sqm to ensure you purchase the correct amount of product.
Prep Your Surface!
THE MOST IMPORTANT STEP
-
Our Pool Cleaner (purchased separately) is mixed with water and must be sprayed onto the surface with a garden sprayer.
-
Use a hard-bristle broom to rub into the surface.
-
It is important to rinse the surface again with water when complete.
-
For smooth surfaces (fibreglass), mix 1L of C/P with 4L of water.
-
For porous surfaces (concrete/gunite), mix 1L of C/P with 2L of water.
-
Allow the surface to dry.
Filling in Cracks
IF NEEDED
Our Joint Filler & Sealant (sold separately) fills and seals cracks or chips before epoxy application. It resists mild acids, alkalis, and occasional contact with aromatic solvents, offering excellent thermal shock resistance. It creates a strong structural bond to repair problem areas.
Surface Preparation
-
Ensure all joints are clean, dry, and free of oil, dirt, debris, curing compounds, sealers, paint, or coatings.
-
Joints must have an open surface texture.
-
Simply removing debris with hand tools is insufficient. Preferred cleaning methods:
-
Dustless concrete saw
-
Wire wheel abrader
-
Sandblasting
-
-
Completely remove residue with vacuuming or oil-free compressed air.
-
For floor cracks, route out and clean cracks before filling. Square off all edges.
-
Ensure joints are completely dry before applying the Joint Filler & Sealant.
Mixing Instructions
-
Premix Part A and Part B separately.
-
Combine equal parts (1:1 ratio) of Part A and Part B.
-
Mix thoroughly for 2–3 minutes using a slow-speed drill with a mixing blade or Jiffy mixer.
-
Scrape the sides and bottom of the container for a uniform mix.
-
Do not thin or aerate.
-
Pot life is 30–45 minutes—apply within this time.
Application
-
Apply the product with a bulk caulking gun, pressure extruder, or other low-pressure methods.
-
Start from the bottom of the joint and fill upward to avoid air pockets.
-
If needed, retool the filler before it sets.
-
For traffic loop sealing:
-
Start at the highest point.
-
Fill the joint to 2/3 depth, allowing it to settle around wires.
-
Make a second application to fill the joint completely.
-
-
Do not apply below 50 °F (10 °C).
-
Cure for 24 hours at 75 °F (24 °C) or longer at colder temperatures before traffic use.
Required Safety Equipment
-
Eye Protection
-
Mask
-
Gloves
-
Protective Clothing
-
Protective Shoes
-
Standard Health and safety requirements.
How To Apply The Pool Epoxy Kit
1. Mixing
-
Mix 1/2 Part A and 1/2 Part B separately in their tins. Mix 1/2 Part A and 1/2 Part B together in a separate container (bucket) for 5-10 mins. Ratio is 1 to 1 by volume. Mixing can be done with a drill and sheer mixer attached.
2. Application
-
Once mixed, the product has a 3-hour pot life.
-
You must apply the epoxy within this time before it becomes unworkable.
-
To avoid waste, it is recommended to divide the mixed product into smaller portions (for example, quarters) and work in sections.
Application Tools
-
Use a brush (maximum 10mm thickness) for edges and hard-to-reach areas.
-
Use a mohair or lambskin roller for larger surface areas.
Coverage and Thickness
-
Apply at a thickness of 0.125–0.2mm per coat.
3. Recoating
-
Allow 24 hours before applying the second coat.
-
Drying time is temperature-dependent:
-
In warmer conditions, recoating may be possible after ±16 hours.
-
In cooler conditions, curing may take up to 72 hours.
-
In cooler temperatures, the coating will feel soft if still curing — wait until it has hardened fully before recoating.
⚠️ If more than 72 hours pass before recoating, lightly abrade (sand) the first coat to ensure proper adhesion before applying the second coat.
Once the surface is ready, repeat the mixing and application steps for the second coat.
